Follow us
POLYETHYLENE
ADDCROSS 1400/1334
Cross-linkable Polyethylene
Addcross1450 is a silane grafted MDPE compound, curable by exposure to moist conditions, circulation of hot water or being at ambient. And shows good extrusion properties at high output rates. Addcross 1450 is used with Addcross 1334 (a catalyst masterbatch) in the ratio of 95:5.
The highly cross-linked materials produced by the two-component system show excellent impact strength, ESCR, creep and internal pressure resistance under ambient and elevated temperature conditions.
Addcross1450 is designed for the requirements in ASTM F1281 for hot and cold water pressure multilayer PEX-AL-PEX pipes in inner layer.
Specification
ADDCROSS 1415/1334
Cross-linkable Polyethylene
Addcross1415 is a silane grafted HDPE compound, curable by exposure to moist conditions, circulation of hot water or being at ambient. And shows good extrusion properties at high output rates. Addcross 1415 is used with Addcross1334 (a catalyst masterbatch) in the ratio of 95:5.Highly cross-linked materials produced by the two-component system show excellent impact strength, ESCR, creep and internal pressure resistance under ambient and elevated temperature conditions.Addcross1415 is designed for the requirements in ASTM F1281 for hot and cold water pressure multilayer PEX-AL-PEX pipes in inner layer.
Specification
Certificate of Analysis
ADDCROSS 1450/1334
Cross-linkable Polyethylene
Addcross1450 is a silane grafted MDPE compound, curable by exposure to moist conditions, circulation of hot water or being at ambient. And shows good extrusion properties at high output rates. Addcross 1450 is used with Addcross 1334 (a catalyst masterbatch) in the ratio of 95:5.The highly cross-linked materials produced by the two-component system show excellent impact strength, ESCR, creep and internal pressure resistance under ambient and elevated temperature conditions. Addcross1450 is designed for the requirements in ASTM F1281 for hot and cold water pressure multilayer PEX-AL-PEX pipes in inner layer.
Specification
ADDCROSS 1545
Anhydride Modified Polyethylene
Addcross1545 is polyethylene grafted with maleic anhydride, it is generally adhesive for metal with polyethylene, and this grade is
designed for multi- layer pipes (PE/PEX-AL-PE/PEX). Addcross 1545 keeps the properties of polyethylene such as good resistance to chemical solvents, weather resistance, mechanical performance and processing.
Specification
ADDALLOY 3406
High density polyethylene
Addalloy 3406 is Black High Density Polyethylene designed for 3-layer anti-corrosion coating application. This grade has
excellent thermal aging resistance. It contains very well dispersed, fine particle size carbon black in order to ensure
excellent weathering resistance . Addalloy 3406 contains special type of antioxidant and processing aid. It is intended for design temperature -45 to +80.
The Addalloy 3406 meets applicable requirements given below:
-ISO 21809-1
- DIN 30670
Specification
Certificate of Analysis
ADDALLOY 3002
Polypropylene Compound for Steel Pipe Coating
Addalloy 3002 is used for 3LPP coating system in natural colored. It is supplied in pellets for melt extrusion.
Addalloy 3002 is a high molecular weight, high compatibility with PP adhesive, good melt flow rate and excellent physical and chemical properties polypropylene block copolymer and is recommended for steel pipe coating in the application of oil and gas transportation systems and high pressure water pipeline system.
The Addalloy 3002 application/uses: -
PP Steel Pipe Coating System
Specification
ADDCROSS 1501
Anhydride Modified Polypropylene
Addcross 1501 is an anhydride modified polypropylene extrudable adhesive resin. It has been designed to
develop a strong chemical bond with fusion bonded primers as an extrusion coating and laminating tie layer.
Addcross 1501 Provides excellent adhesion to Steel Pipe, polyolefins, polyamides, aluminum foil, fibers
and other. It has high thermal stability and good flexibility.
The Addcross 1501 application/uses:
- Tie-layer
- Steel Pipe Coating
Specification
ADDCROSS 1575
Maleic Anhydride Grafted Polyethylene Adhesive
Addcross 1575 is an anhydride modified polyethylene extrudable adhesive resin. It has been designed to develop a strong chemical bond with fusion bonded primers as well as top coat in three layer PE coating system. It has high thermal stability and good flexibility. It is intended for design temperature -40 to +80
The Addcross 1575 meets applicable requirements given below:
- ISO 21809-1
- DIN 30670
- IPS-G-TP-335
Specification
ADDCROSS 1590
Maleic Anhydride Grafted Polyethylene Adhesive
Addcross 1590 is an anhydride modified polyethylene extrudable adhesive resin. It has been designed to develop a strong chemical bond with fusion bonded primers as well as top coat in three layer PE coating system. It has high thermal stability and good flexibility. It is intended for design temperature -40 to +80
The Addcross 1590 meets applicable requirements given below:
- ISO 21809-1
- DIN 30670
- IPS-G-TP-335
Specification
ADDALLOY 3403
Addalloy 3403 is general purpose Low Density Polyethylene. This grade can be used in various lines, Addalloy 3403 contains special type of
antioxidant and processing aid
The Addalloy 3403 meets applicable requirements given below:
- ASTM D1248 Type 1-Class A Category 4
Specification
ADDCROSS 1207/1357
Addcross 1207 is a cross-linkable polyethylene compound, specially designed for Wire and Cable isolation applications and meets the requirement of the IEC 60502-1 and HD626 The Addcross 1207 base material in combination with the Addcross 1357 catalyst master-batch will accelerate the moisture-induced crosslinking reaction Addcross 1207 is based upon a low density polyethylene and contains permanent scorch retardant additives which ensure safe processing and gives a possibility to use a highly active crosslinking catalyst.
Specification
ADDCROSS 1230/1331
Addcross 1230 is a cross-linkable polyethylene compound, specially designed for Wire and Cable isolation applications and meets therequirement of the IEC 60502-1, BS 7655 1.3., ASTM D 1248 Type I, Class A, Category 4, HD 603 S1
Addcross 1230 base material in combination with the addcross 1331 catalyst master-batch will accelerate the moisture-inducedcrosslinking reaction Addcross 1230 is based upon a low density polyethylene and contains permanent scorch retardant additives whichensure safe processing and gives a possibility to use a highly active crosslinking catalyst. Addcross 1331 contains antioxidant and dryingagent. Addcross 1230 is used with Addcross 1331 ( a catalyst master-batch) in the ratio of 95:5
Specification
ADDCROSS 1250/1331
Addcross 1250 is a cross-linkable polyethylene compound, specially designed for Wire and Cable isolation applications and meets therequirement of the IEC 60502-1
The Addcross 1250 base material in combination with the addcross 1331 catalyst master-batch will accelerate the moisture-induced crosslinking reaction Addcross 1250 is based upon a low density polyethylene and contains permanent scorch retardant additives which ensure safe processing and gives a possibility to use a highly active crosslinking catalyst. Addcross 1331 contains antioxidant and drying agent.
Addcross 1250 is used with Addcross 1331 ( a catalyst master-batch) in the ratio of 95:5